Flat Products

Sheets, Plates, Coils & Strips in Every Finish

Hot-rolled and cold-rolled flat products in stainless, carbon and alloy steel, nickel alloys, titanium, copper, brass and aluminium — in the thickness and finish you specify.

Get a QuoteWhatsApp Us
Metal sheets, plates, coils and strips
ASTM A2402B · BA · No.4
Hot & Cold RolledSheets, plates, coils and strips
4 FormsSheet · Plate · Coil · Strip
Finishes2B · BA · No.4 · No.1
MTCEN 10204 3.1 / 3.2
Heat No.Marked and traceable
Overview

Flat Products for Fabrication and Process Equipment

From thin-gauge sheet for kitchens and cladding to heavy plate for pressure vessels, flat products are the starting point for most fabricated equipment.

We supply sheets, plates, coils and strips in stainless steel, carbon steel, alloy steel, nickel alloys, titanium, copper, brass and aluminium. Each lot is ordered to a specification and thickness and is supplied with its mill test certificate.

Tell us the grade, thickness, width, length and finish and we will confirm what is available. Cutting and slitting can be discussed at enquiry stage.

  • Hot-rolled & cold-rolled
  • Multiple surface finishes
  • Thickness and size as ordered
  • Cut-to-size on request
Product Range

Choose the Form That Fits Your Process

The same grade is available in different forms — pick the one that suits your fabrication route.

01

Sheets

Thinner flat product, usually cold rolled, with a smoother, brighter surface.

Best for · Cladding, kitchens, cabinets
02

Plates

Thicker flat product, usually hot rolled. Used where strength and thickness matter.

Best for · Tanks, vessels, base plates
03

Coils

Continuous rolled material wound into coils for high-volume cutting and forming.

Best for · Slitting, roll forming, stamping
04

Strips

Narrow, slit-width flat product supplied in coils or cut lengths.

Best for · Tube making, springs, gaskets
Specifications

Common Specifications We Supply Against

Governing standards for each material family. Tell us the one on your purchase order.

Material / ProductSpecificationTypical GradesNotes
Stainless plate, sheet & stripASTM A240 / ASME SA240304 · 304L · 316 · 316L · 321 · 310S · 2205General requirements: ASTM A480
Carbon steel plateASTM A36 · A283A36 · A283 Gr CStructural and general fabrication
Pressure-vessel plateASTM A516Gr 60 · Gr 70Moderate and lower-temperature service
Alloy steel plateASTM A387Gr 11 · Gr 22 · Gr 91Cr-Mo steels for elevated temperature
Nickel alloy plate, sheet & stripASTM B168 · B443 · B424Alloy 600 · 625 · 825Corrosion and heat resistant
Titanium sheet, strip & plateASTM B265Grade 1 · Grade 2 · Grade 5Light, corrosion resistant
Copper sheet, strip & plateASTM B152C10200 · C11000Electrical and thermal applications
Brass sheet, strip & plateASTM B36C26000 · C27000Decorative and general purpose
Aluminium sheet & plateASTM B2091100 · 3003 · 5052 · 6061General fabrication and marine

Thickness, width and length tolerances follow the product specification. Availability depends on grade and size.

  • Grades we supply:
  • SS 304 / 304L
  • SS 316 / 316L
  • SS 321
  • SS 310S
  • SS 430
  • Duplex 2205
  • Carbon Steel A36
  • A516 Gr 70
  • Inconel 600 / 625
  • Incoloy 800 / 825
  • Monel 400
  • Titanium Gr 2
  • Copper
  • Brass
  • Aluminium
Surface Finish

Stainless Steel Finishes at a Glance

The surface finish changes appearance, cleanability and price.

FinishProcessLook & typical use
No.1Hot rolled, annealed and pickledDull, rough. Heavy plate, tanks and industrial equipment.
2DCold rolled, annealed and pickledDull, uniform. Deep-drawn parts and equipment.
2BCold rolled, annealed, pickled and skin-passedSmooth and bright — the most common finish for general use.
BABright annealedHighly reflective, mirror-like. Appliances and decorative work.
No.4Polished with abrasive, directional grainBrushed satin. Kitchens, food equipment, architecture.
No.8Mirror polishedHighly reflective mirror. Decorative panels.
Applications

Where Sheets / Plates / Coils / Strips Are Used

The industries that most often specify this product.

  • 01Chemical & Process
  • 02Food & Pharma
  • 03Architecture
  • 04Power
  • 05Marine
  • 06Automotive
  • 07Fabrication
  • 08Oil & Gas
Enquiry Checklist

Six Details Make a Complete Enquiry

Send these with your request and we can quote without going back and forth.

  1. 1

    Material & grade

    For example SS 304, 316L, A516 Gr 70 or Inconel 625.

  2. 2

    Specification

    ASTM / ASME, EN or IS reference.

  3. 3

    Thickness

    In mm, with the tolerance if it is critical.

  4. 4

    Width × length

    Standard sheet size, cut size or coil width.

  5. 5

    Finish

    No.1, 2B, BA, No.4, or as-rolled for carbon steel.

  6. 6

    Documents & testing

    MTC 3.1 or 3.2, PMI, UT or third-party inspection.

Certificates & Testing With Every Order

Mill test certificates to EN 10204 3.1 / 3.2, PMI, hydro and NDT testing, and third-party inspection can be arranged. Read how every order is checked.

Quality Policy
FAQ

Sheets / Plates / Coils / Strips: Common Questions

Still have a question?

Our team can help you choose the right grade, size and specification.

Ask on WhatsApp

The split is by thickness. Sheet is the thinner product, usually cold rolled with a smooth finish. Plate is thicker, usually hot rolled. The exact thickness at which sheet becomes plate depends on the material and the standard.

2B is a smooth, moderately reflective finish produced by cold rolling, annealing, pickling and a light final skin-pass. It is the most common general-purpose finish for stainless sheet.

Cut-to-size and slitting requirements can be discussed at enquiry stage. Share the dimensions and quantity you need and we will confirm what is possible.

Material is supplied with a mill test certificate. Ask for EN 10204 Type 3.1 or 3.2 when you enquire, and mention PMI, ultrasonic testing or third-party inspection if you need them. See our Quality Policy.